After many hours and a few long nights meeting at the Makerspace our team has progressed past regional championships onward and upward. What is T.I.R.E.D doing in the Makerspace? It’s way more than building robots. FIRST Tech Challenge teams (up to 15 team members, grades 7-12) are challenged to design, build, program, and operate robots …
Hi, My name is Freeman. 😊 I joined Makerspace around May 2021. My first experience with Makerspace was the open house which occurs three or four times a week. Mike, one of the members of the space, gave me a tour. I was impressed by all the cool projects on display and the excellent tools …
Melbourne Makerspace had a request for the Prusa RS2 design face shields. We had a 2 day window to get them ready, so they could hitch a ride with someone headed to the facility. Great teamwork from everyone involved. And managed to do it with no more than 2 people together at at time, due …
My employer asked if I was able to assist him in fixing a transmission housing. A small piece had broken off where a bolt fastens the transmission housing to the engine. The broken piece was long gone, so we were left with no other choice but to fabricate a new one. Step 1 : Sculpt Broken …
A local artist, David Burton, asked if I could add some electronics to his art so that it will play a song when a person stands in front of it. So of course I immediately set to work on making a shopping list of parts and built a prototype. Luckily there is already a single …
Another great project built by one of our members, Steve Newell: I have a commercial sewing machine and I make big stuff, which means I go through a lot of thread. I couldn’t find a wall storage unit that would accommodate the bigger spools – all of them seemed geared to the smaller spools with …
A project by Melbourne Makerspace member, John Gay: My first computer was a TRaSh-80 (TRS-80) from Radio Shack for my 14th Birthday. As the name implies, it was an 8 bit computer based on the Z-80 microprocessor. It had a whopping 4K (4 thousand bytes) RAM and ran at somewhere around 1Mhz (1 million cycles per …
One of our members used the woodshop tools here at the Melbourne Makerspace to create a custom, wooden urn for his friend’s dearly departed dog, Bella. This shows a good use of the wood lathe and drill press in our wood shop. If you want to take a tour of our wood shop and the …
So my neighbor and I have a fence between us that we can’t see through. Their dogs fight with our dogs through the tiny slits in the wooden fence boards and cause a real ruckus that surely wakes up any sleeping neighbors. So we tried to think of various ways to let each other know …
